Posted by Unknown
Unless you have a router, it is very hard to make perfect circles. I build telescopes and have used three Ready to Cover plywood table tops as bearings and ground boards for telescope projects. A small niche market to be sure, but fellow amateur astronomers will know what I'm talking about
Posted by three and one half degerz
Ordered these quality wood rounds for a special art project and they are indeed excellent quality wood, finished and edged as indicated, ordering and shipping without incident, timely received. However, was surprised to see a screw/guide hole bored at center on one face of each of the rounds (presumably a center guide aiding manufacturing method). While patchable, was expecting double A finishes in light of the price (which is why I choose this vendor). The website should likely mention this slight defect on one face for instances where this might be seen as an unacceptable "defect." Of course no issue if painting/coating or refinishing the pieces or if that side is hidden from view.
Posted by Yolanda
I attached a photo of the table that I was able to create using the table top from my first order from Ready to Cover. Like I said, the finish on the table was so nice, I almost hated to cover it! Because of this table, I was asked to teach a mosaic class for crafters. Couldn't have done this without a good base.